News

Benefits of Using Injection Molding

What is injection molding?
Injection molding is an efficient, effective way to produce refined products, especially those made of plastic. The process is quick, accurate, and saves valuable production time. In fact, using injection molding is a surefire way to produce a quality product according to precise specifications. While there are many molding processes, injection […]

By |August 13th, 2015|News|0 Comments

Why Injection Molding Is An Important Way To Manufacture

Have you ever seen the movie The Graduate, starring Dustin Hoffman? Well, whether you have or haven’t, we’re going to tell you about our favorite part. There’s one specific scene in the beginning of the movie where Hoffman’s character, Ben receives some advice from another character, Mr. McGuire. Within this dialogue, McGuire says to […]

By |July 1st, 2015|News|0 Comments

Everyday Items Made By Injection Molding

Plastic injection molding may seem like a complicated concept to the consumer, but it’s the most common manufacturing method because of its efficiency and ability to create a plethora of everyday items. The everyday items we use that are made by injection molding range from complex and intricate components to larger more simple objects.

We’ve […]

By |May 17th, 2015|News, Plastic Injection Molding|0 Comments

What Everyday Essential Items are Made With Injection Molding Systems?

It can seem like a boring topic once the name is said, but a lot of the products you commonly use were actually made by advanced injection molding systems. Thermoplastics have actually been extremely popular within the manufacturing industry since the 1940’s when the wars were going on and there was a high demand to mass produce products. Some of the first industries to enlist with the help of injection molding systems included: Continue reading “What Everyday Essential Items are Made With Injection Molding Systems?” »

By |March 4th, 2015|News, Plastic Injection Molding|0 Comments

Interview with Don Nemens, Vice President of Operations

Written by Felicia Franklin
Don Nemens has been with Hi-Craft for 20 years.  Thru Hi-Craft’s financial support for his post-secondary education, Don has finished training at both ITT Technical Institute and Macomb Community College.  He has been dedicated to Hi-Craft’s success ever since.  “I treat Hi-Craft like it’s my own,” says Don.

Mr. Nemens is now […]

By |October 13th, 2014|News|0 Comments

Low PPMs Last Year

Last year, Hi-Craft Engineering supplied over 20 million injection molded parts to our world-wide customer base. Hi-Craft is proud of our corporate-wide commitment to quality and continuous improvement. The production and quality teams share a common passion for molding the highest quality parts in the industry. 
Read more below about Don Nemens, one of our key […]

By |October 13th, 2014|News|0 Comments

Tooling Innovation Leads to Reduced Overall Total Cost and Increasing Competitiveness

Like many molders, Hi-Craft is faced with the increased competition from overseas production sources.  We have personally witnessed valuable programs sent out of the United States in search of lower cost manufacturing.  Hi-Craft is committed to finding solutions to compete in this highly charged, global environment.  And, we are doing it –one part and […]

By |October 13th, 2014|News|0 Comments